Depending on the number of desired sawheads The multi-head sawmill from SERRA is used as a resaw for boards and slats.The benefit against a circular resaw is, that the cutting kerf is much thinner. Because of that less precious wood will be transformed into sawdust, furthermore the power requirement is lower.
SERRA MK 402
The special resaw – with automatic timber returning system
In contrast to the main sawmill not the sawhead is moving back and forth along the log. Instead of that, the sawhead is static and the lumber gets pushed through.
Pass through width max.
23.6“
Pass through height
6.25“
Cutting length min.
34.5″
MAIN ENGINE
30 hp – 120 hp
The
Additional sawheads
The MK402 is expandable with additional sawheads, for example MK405 with five sawheads. The merry go round system is useful, if one passage was not enough for a beam. The compact, sturdy construction is necessary to cut also hardwood with an edge length of 420x420mm with unlimited length. The main engine with 11kW of each sawhead grants lower power consumption.
The
Optimal access
The feeding system works by hydraulically powered starrolls which push from above the log. Additionally a hydraulically powered chain conveyor made out of steel grant the right feeding system also while milling heaviest hardwood. The cutting height can be hydraulically adjusted exactly at each sawhead.
Any further questions?
Any other information?
Get in contact! Look forward to us, as we look forward to seeing you.
SERRA MK 402
Technical Data
| MK 402 | |
| Log length | 47“ – infinite |
| Width of cut | 15.75“ |
| Height of cut | 0.27“ – 15.75“ |
| Performance per sawhead | 15 hp / 25 hp |
| Feeding speed | 0 – 114 ft per/min |
| Dimension of sawblades | |
| Width | 3.15“ |
| Thickness | 0.039“ |
| Length | 201“ |
SERRA MK 402
Praxis Video
Youtube - Follow us
SERRA MK 402
Impressions
